320W Bifacial Solar Panel（2-Pack）
320W Bifacial Solar Panel（2-Pack）
products.product.pickup_availability.unavailable
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a ella.
Generalmente se envía en un plazo de 3 a 5 días y se entrega en un plazo de 10 días hábiles.
Package Includes
- If you have any questions regarding this product, please call us at 1 (909) 287-7111 or submit a ticket for troubleshooting assistance.
- More questions about your off-grid power system? Learn more from Renogy Learning Center!
|
Bifacial 320 Watt Monocrystalline Solar Panel
4/6/10 x
|
| Bifacial 320 Watt Solar Panels | |
|---|---|
|
Max Power at STC: 320W |
Open Circuit Voltage: 30.43V |
|
Short Circuit Current: 13.09A |
Optimum Operating Voltage: 26.05V |
|
Optimum Operating Current: 12.28A |
Maximum System Voltage: 1000VDC |
|
Maximum Series Fuse Rating: 30A |
Module Efficiency: 19.2% |
| Operating Temperature: -40°F~185°F / -40℃~85℃ | Dimensions: 1725x964x35mm / 67.9x38.0x1.4in |
a.Captures sunlight from both sides b.More efficient and power than monofacial panels c.Perform better in overcast weather d.Install in any direction
A solar panel has to be connected a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
On-grid simply means solar power equipment (array or solar panel) is connected to the electrical grid, while off-grid refers to systems that are not connected to the grid and therefore store the generated power for later use. Off-grid systems are not affected by grid blackouts.
Solar panel performance may be hindered for a number of reasons. Most commonly environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build up on the top glass will cause a reduced power output.
Solar panels can be connected in series or in parallel to meet your electrical circuit size and power demand. Connecting solar panels in series will have the effect of adding up their operating voltage output, while system current output will be the same as that for one panel. While, connecting solar panels in parallel will have a different effect; individual panels operating current output will add up to be the system output current, while system output voltage will be the same as the output voltage of one solar panel. To meet the optimum power output and system rating for your power system, you can use both parallel and series connections.
The best way to gauge how many solar panels you need, is to understand and define the power load needed from this system. Power is measured in Watts, and capacity is commonly measured in Watt-hours (multiplying power output in watts by the required number of hours of operation multiplied by a safety factor of 1.5-2). Therefore, it is wise to size your battery bank first based on the minimum required capacity, and accordingly decide how many panels or how much power input is needed.
 |
| Brand | Renogy |
| Vendor | Renogy |
| Model | 4pcs-bifacial-320-watt-monocrystalline-solar-panel |
For warranty and technical support, visit renogy.com/support or call 1-909-287-7111.