WD-N1-MRO replacement for waterdrop WD-N1-W countertop ro water filtration system
$52.99 USD
/
Los gastos de envío se calculan en la pantalla de pago.
WD-N1-MRO replacement for waterdrop WD-N1-W countertop ro water filtration system
$52.99 USD
/
Los gastos de envío se calculan en la pantalla de pago.
2 en stock
products.product.pickup_availability.unavailable
Pago y seguridad
Su información de pago se procesa de forma segura. No almacenamos los datos de su tarjeta de crédito ni tenemos acceso a ella.
Generalmente se envía en un plazo de 3 a 5 días y se entrega en un plazo de 10 días hábiles.
Item model number
WD-N1-MRO
Material
RO membrane
Filter life
18 months
Dissatisfied with traditional under-sink RO filters?
Many people complain about these systems and their
difficult installation processes. Others also talk about how it is uninformative about water
quality and TDS levels. And being a permanent fixture, you can only access fresh water where
it’s set up. There has to be a better option without these problems.
This is where our countertop reverse osmosis water
filter comes in handy. It’s a plug-and-play device, so no need to install. It’s smooth and easy
to operate, plus it analyzes water quality in real time with its smart screen.
Get clean, purified water anytime you want with the Waterdrop N1 Countertop Reverse Osmosis Water Filtration System!
Our tabletop water dispenser has 2 filter cartridges that
offer a 4-stage filtration process. This system removes 1,000+ impurities, including metals, large
particles, and chlorine. The water then runs through a light for further purification, which you can
set at 20 or 60 minutes for the machine to handle automatically.
This RO water purifier has a smart display screen that
shows the machine’s status and the water quality. Get real-time information on TDS levels, tank
contents, and filter life and rest assured you are drinking fresh water every time. Choose from 4oz,
8oz, 16oz, or manual volume setting up to 1.5L for precise water delivery without spills.
With the 3:1 drain ratio of this countertop water dispenser
with filter, you’re making the eco-conscious choice. It features a water recycling technology that
re-filters any waste water. Paired with its automatic flushing and standby functions, you’ll save
money on power and water while helping the Earth.
How often should I change the filter?
The service life of the MRO filter is 18 months. The result might vary
based on the local water quality. This long lifespan helps save considerably on filter replacement.
How to replace the MRO replacement water filter for N1countertop reverse osmosis system?
1.Remove the water tank cover. Hold the machine with one hand, and remove
the water tank with the other hand.
2.Open the system top cover, twist the MRO filter 90° to “ .” counterclockwise, and take out the old filter.
3.Remove the wrappings and protective cap from the new filter.
4.Insert the new filter into its corresponding hole. Twist the filter 90° clockwise to “ .”
5.Close the system top cover, put the water tank back after filling it with water, and then close the water tank cover.
6.Press and hold the MRO filter life reset button for 5 seconds until the system beeps; the MRO life indicator light will turn blue and go out.
7.After the filter life is reset, the system will flush automatically for 15 minutes. Then the “Flush” indicator light will flash constantly. After the “Pump” indicator light goes out, put a container (>51 oz) below the spout. Press the “Start/Off” button to get water for deep flushing until the “Flush” indicator light goes out.
2.Open the system top cover, twist the MRO filter 90° to “ .” counterclockwise, and take out the old filter.
3.Remove the wrappings and protective cap from the new filter.
4.Insert the new filter into its corresponding hole. Twist the filter 90° clockwise to “ .”
5.Close the system top cover, put the water tank back after filling it with water, and then close the water tank cover.
6.Press and hold the MRO filter life reset button for 5 seconds until the system beeps; the MRO life indicator light will turn blue and go out.
7.After the filter life is reset, the system will flush automatically for 15 minutes. Then the “Flush” indicator light will flash constantly. After the “Pump” indicator light goes out, put a container (>51 oz) below the spout. Press the “Start/Off” button to get water for deep flushing until the “Flush” indicator light goes out.
What will happen if I do not change my filter when the filter life indicator light turns red?
Over-used filters will degrade the filtration performance, causing
contaminants to leak back into the water. This will adversely affect your health. To avoid this, we
advise that you immediately replace the replacement filter cartridge for N1 countertop water dispenser
if the filter life indicator light turns red.
Why is the filter life indicator light still red after changing the filter?
You have forgotten or failed to reset the filter life indicator light.
Please reset it again: Press and hold the filter life reset button for 5 seconds until the system beeps.
The filter life indicator light will then turn red and go out.
Press the “Start/Off” button to get water after resetting the filter until there is no water flowing out, why is the “Flush” indicator light still on?
When the flushing is not completed, the “Flush” indicator light will keep
on. A total of 102 oz of water must be discharged. The water dispensed during flushing is not drinkable.
The flushing mentioned above is the basic requirement, and it might vary based on the local water
quality. It’s recommended to flush 2 or 3 more gallons of water until the water looks clean and four
tanks of water are needed during the whole process.
Is the MRO filter material safe to use?
Yes. The replacement MRO filter for this N1 countertop reverse osmosis
water filter is made of BPA-free materials to protect you from the secondary contaminants in the filter
cartridge.
Does the installation of this MRO water filter require tools or installation kits?
Thanks to the exquisite design, it is easy to install and operate this
system without any tool or other installation kits.
Easy Replacement
The 3-second filter replacement process requires no tools and any
professional skills.
Superior Filtration Performance
The innovative RO membrane is designed to reduce TDS, chemical
matters, heavy metals, bacteria, and viruses.
0.0001μm Pore Size
The reverse osmosis technology is the most advanced filtration
solution among other known water purification methods. The 0.0001 micron pore size is 1,000,000
times thinner than the human hair diameter. This means it can trap most harmful substances in tap
water.
Only $0.06/Day
Waterdrop adopted advanced water filtration technology to
extend the filter's lifespan. Our MRO filter can last at least 18 months, which is longer
than the ordinary filters (one-year lifespan) on the market.
Spend only $0.06 a day and enjoy pure and fresh-tasting water
anytime.
Waterdrop MRO filter cartridge features innovative filtration technology and advanced reverse osmosis membrane to achieve the optimal performance.
Waterdrop MRO filter cartridge features innovative filtration technology and advanced reverse osmosis membrane to achieve the optimal performance.
Your Purchase, Your Love
Invest in sustainability, lasting clean water, and improved health
for children and their families.