XPOWER AP-2000 Portable HEPA Air Scrubber – 2000 CFM

The XPOWER AP-2000 is a 2000 CFM HEPA air scrubber running on 115V at 8.5A with a 2-speed switch (1000 or 2000 CFM). Multi-stage filtration includes NF-24 pre-filter, NF-24RP framed pre-filter, and HEPA-300-WB thick HEPA filter. ETL/CETL certified, filter change indicator light, vacuum pressure gauge, 12" ductable exhaust, 4 casters (2 swivel, 2 stationary), 4 integrated handles, and 25-ft power cord. At 112 lbs in roto-molded polyethylene housing, it is the highest-capacity single-unit XPOWER air scrubber.

AP-2000 – Key Specifications and Features

• Airflow: 2000 CFM (high speed) or 1000 CFM (low speed)
• Electrical: 115V, 60 Hz, 8.5A
• Speed settings: 2 (1000 / 2000 CFM)
• Filtration: multi-stage — NF-24 pre-filter, NF-24RP framed pre-filter, HEPA-300-WB thick HEPA (99.97% @ 0.3 µm)
• Filter change indicator: light signals HEPA replacement needed
• Vacuum pressure gauge: confirms operational status
• Exhaust duct: 12" ductable outlet
• Mobility: 4 casters (2 swivel, 2 stationary), 4 integrated handles
• Housing: roto-molded polyethylene (PP), stackable
• Cord: 25 ft
• Certifications: ETL/CETL
• Xactimate code: AQRS (air scrubber)
• Dimensions: 40.2" × 29" × 32.3"
• Weight: 112.4 lbs

Where the AP-2000 Performs

Large-scale remediation contractors use the AP-2000 as a primary negative-air machine on Category 2 and 3 mold jobs, where 2000 CFM at 8.5A on a 15A circuit provides the highest single-unit air change rate available from XPOWER. Hospital construction programs specify it for large containment zones — operating areas, mechanical rooms, and multi-room renovation phasing — where ICRA protocols require HEPA-filtered negative air across volumes exceeding 3,000 sq ft. The 2-speed control allows the same unit to serve both active abatement (2000 CFM) and holding negative pressure during non-demolition phases (1000 CFM at lower noise). Four casters and four handles allow repositioning by two operators without lifting equipment, critical in live healthcare facilities where floor damage from equipment movement must be avoided.

Related: Air Scrubbers · XPOWER Equipment · Mold Remediation Equipment

AP-2000 vs. AP-2500D – Induction Motor vs. DC Brushless at High CFM

The AP-2000 (2000 CFM, 8.5A, induction motor, ETL/CETL certified) is the higher-volume certified unit for remediation billing. The AP-2500D (1800 CFM, 8A, DC brushless, certification pending) is quieter and more energy-efficient. For maximum certified CFM with ETL/CETL documentation required by insurance adjusters and project managers, the AP-2000 is the specification. For occupied environments where noise is the primary constraint, the AP-2500D's brushless motor is the better choice despite the slightly lower airflow.

Documents

Manual