Introducing Woodhaven two-step mortise jigs for the Peter Meier CEAM hinges.  They are the fastest, easiest, lowest cost and most accurate way to route the two-step mortises required for these unique hinges. Made of 1/2" phenolic for heavy duty use, they measure 5-5/8" x 7-3/4" for maximum router support. Includes an 8"-12 Double Track (depends on model) for mounting the jig and clamping it to your work. Clamps not included.

Optional 95" Double Track, Part Number 4095, available to mount multiple CEAM Hinge Jigs and Flip Stops. Optional 6507-6513-Centering Drill centers itself in the hinge screw mounting hole for a perfectly centered pilot hole.

• Each model is designed for a specific CEAM hinge, select from drop down.
• 8220 is for a CEAM 1130inox hinge - 24.3mm wide x 135.2mm long shallow mortise
• 8221 is for a CEAM 1131S hinge - 32.2mm wide x 160.2mm long shallow mortise
• 8222 is for a CEAM 1230S hinge - 30.2mm wide x 130.4mm long shallow mortise
• 8223 is for a CEAM 1418 hinge - 30.0mm wide x 150.6 mm long shallow mortise
• 8224 is for a CEAM 1430 hinge - 22.2mm wide x 128.7mm long shallow mortise.
• 8225 is for a CEAM 1431 hinge - 32.2mm wide x 180.5mm long shallow mortise
• 8226 is for a CEAM 1432 hinge - 32.2mm wide x 230.0mm long shallow mortise
• 8227 is for a CEAM 1432W hinge - 32.0mm wide x 230.0mm long shallow mortise
• 8228 is for a CEAM 1450 hinge - 30.2mm wide x 130.4mm long shallow mortise
• 8229 is for a CEAM 929 hinge - 14.4mm wide x 76.2mm long shallow mortise
• 8230 is for a CEAM 2010ss hinge - 89.0mm wide x 39.8mm long shallow mortise

• 8220, 8222 & 8229 CEAM Jigs require a 1/2" solid carbide spiral upcut bit 1-1/2" cut length (our PN 15409 or equivalent) and a 3/4" OD bushing (our PN 5032K or equivalent), both sold separately.
• 8221, 8225, 8226, 8227,8228 and 8230 CEAM Jigs require a 1/2" solid carbide spiral upcut bit 2" cut length (our PN 15410 or equivalent) and a 3/4" OD bushing (our PN 5032K or equivalent), both sold separately.
• If using a compact router with only a 1/4" collet you may use a 1/4" solid carbide spiral upcut bit (our PN 15204 or equivalent) and a 1/2" Bushing & Locknut (our PN 5025K or equivalent), both sold separately.
• If using your own bushing, make sure the nose isn't over 3/8" long.
• Hinge setback will be verified prior to shipment.
• Jig clamps to the work (no nail holes) and, using your plunge router, both the long/shallow and short/deep mortises are cut without moving the jig or part. Has two retractable stops for the short/deep mortise.

Here are links to our Spiral Up Cut Bits and Guide Bushings 

For more information of the Peter Meier CEAM hinges visit their website at https://petermeier.com/product-category/ceam-door-hinges/

The Video below highlights our SOSS hinge jigs which use the same design style as the CEAM hinge jigs.